宝德00553431 burkert8032流量计 德国BURKERT8032流量计有多种结构形式，如：管道式、夹装式、对焊式等。如果描述不作特殊说明，安装方法是等同的。由于流量计具有对流体流动状态整流的功能，因此一次传感器部分的安装要求远不孔板等相对宽松的多。由于流量计是管段式，它与工艺管道的同轴度、垂直度无严格的要求。
宝德00553431 burkert8032流量计German BURKERT8032 flowmeter has many kinds of structure, such as: pipe, sandwich, butt welding, etc. If the description is not specified, the installation method is equivalent. Since the flow meter has the function of the flow state rectifier, the installation of a sensor part is far less than that of the aperture plate. Because the flowmeter is the pipe segment, it has no strict requirements for the coaxiality and perpendicularity of the process pipe. 1. Pipe flange type: there are mounting flanges on both ends of the meter. The mounting flange (also known as user flange) of the two sides of the process pipeline is a relatively common structure, which is applicable to the diameter (DN15mm ~ DN65mm). This form is suitable for the installation of throttle device and differential pressure transmitter, which is commonly used to measure the steam flow and can be used when measuring other high temperature media. 2. Flange mounting type: for the installation of small mouth through flowmeter, each flowmeter jade process pipe needs only 2 flanges. The flanges are welded together with the process pipe and the flow meter is mounted between the two flanges. The installation method is the same as that of the vortex street flowmeter (less than 300mm). 3, the integration of small type: suitable caliber DN40mm or less, the medium temperature of 120 ℃ or less fluid. The structure is to combine the differential pressure transmitter directly with the tower flow meter into a whole. There is no direct pressure tube, pressure valve, three valve group.
宝德00553431 burkert8032流量计德国BURKERT8032流量计有多种结构形式，如：管道式、夹装式、对焊式等。如果描述不作特殊说明，安装方法是等同的。由于流量计具有对流体流动状态整流的功能，因此一次传感器部分的安装要求远不孔板等相对宽松的多。由于流量计是管段式，它与工艺管道的同轴度、垂直度无严格的要求。 1、管道法兰式：是指流量计两端有安装法兰。与工艺管道两端同规格的安装法兰（也称用户法兰）连接，是比较常用的结构形式，适用的口径（DN15mm～DN65mm）。此种形式适用于节流装置与差压变送器分体安装时选用，一般常用于测量蒸汽流量时使用，在测量其他高温介质时也可以使用。 2、法兰夹装式：用于小口经流量计的安装形式，每台流量计玉工艺管道只需2片法兰。法兰与工艺管道焊接在一起，再把流量计夹装在两法兰之间。此中安装方法与涡街流量计（≤300mm）安装方法相同。 3、小口径一体化式：适用口径≤DN40mm，介质温度≤120℃的流体。该结构是把差压变送器直接与塔形流量计组合成一个整体。二者之间无导压管、取压阀、三阀组。
更多宝德产品和选型可以销售人员。
