宝德00019310 burkert0406系列供货商BURKERT电磁阀0406系列是一种带有伺服活塞的先导式电磁阀,适合温度不超过 +180 °C 的介质。为了*打开阀门,所需压差不能低于 1 bar。在无流量的状态下,阀门会在自身介质压力及弹簧力的作用下关闭。
宝德00019310 burkert0406系列供货商
BURKERT solenoid valve, 0406 series is a kind of with the forerunner of the servo piston type solenoid valve, is suitable for the medium temperature shall not exceed + 180 ° C. To fully open the valve, the required differential pressure must not be less than 1 bar. In the absence of flow, the valve will be closed under its own medium pressure and spring force.
Germany's baode solenoid valve is suitable for neutral medium - high temperature: hot water, hot air, steam
Servo - assisted (servo piston) solenoid valve, two of two, often closed
High temperature version, up to 180 ℃
Overlapping coil systems
Cover head and flange shell
Inner hole: 13.0 to 40.0mm
Kv value: 3.7 to 18.0m3/h
Connection: G,NPT,Rc1/2 "to 11/2", flange (DIN)DN25 to DN40
Body material: brass (seat is stainless steel), cast iron (DN25 to DN40 flanges)
Sealing material: PTFE
Medium temperature: 0 to + 180 ℃
Pressure range: 1.0 up to 12bar (steam highest 10bar)
Power supply: 24V 110V 230V AC50or 60Hz 24VDC
Load cycle: * continuous work
Electrical connection: cable socket, protection grade IP65
宝德00019310 burkert0406系列供货商
BURKERT电磁阀0406系列是一种带有伺服活塞的先导式电磁阀,适合温度不超过 +180 °C 的介质。为了*打开阀门,所需压差不能低于 1 bar。在无流量的状态下,阀门会在自身介质压力及弹簧力的作用下关闭。
德国宝德电磁阀适用于中性介质-高温:热水、热空气、蒸汽
伺服辅助(伺服活塞)电磁阀,两位两通,常闭
高温版本,zui高至180℃
重叠的线圈系统
套头和法兰外壳
内孔:13.0 to 40.0mm
Kv值:3.7 to 18.0m3/h
连接口:G,NPT,Rc1/2" to 11/2",法兰(DIN)DN25 to DN40
阀体材料:黄铜(阀座为不锈钢),铸铁(DN25至DN40法兰)
密封材质:PTFE
介质温度:0 to +180℃
压力范围:1.0 up to 12bar(蒸汽zui高10bar)
电源:24V 110V 230V AC50or 60Hz 24VDC
负载周期:*连续工作
电气连接:电缆插座,防护等级IP65
更多宝德产品和选型可以销售人员。