产品列表PRODUCTS LIST

首页>产品中心>burkert>burkert定位器>宝德定位器 burkert定位器

宝德定位器 burkert定位器

简要描述:

宝德定位器 burkert定位器

分享到: 1
在线留言
宝德定位器 burkert定位器

宝德定位器 burkert定位器The SideControl positioner 8635 is an electric-gas position adjuster, which is used for the dual-line technology for pneumatic operation valves with thrust actuators or oscillating actuators. The signal processing, regulation and control of internal control system can be realized by electronic devices controlled by microprocessor. The function of automatic tuning software enables the position regulator to automatically match the used regulator. The parameters of the position regulator can be easily given by using three operation buttons and the display of text display

宝德定位器 burkert定位器

Dust content level 5 (particle size is less than 40 micron)

Particle density level 5 (less than 10 mg/m3)

Stress dew point. Under the working conditions of 10 °

Level 3 (less than 1 mg/m3)

Control air temperature - 25... 60 ° C + 1)

Ambient temperature - 25... 60 ° C + 1)

Supply pressure 1.4... 6 BAR3)

Air flow capacity) 55 litres/min, 1.4 BAR3)

Control valve 170 litres/min 6 BAR3) pressurized and exhaust

The essential gas consumption is 0 liters per minute

Positioning range

Linear actuator 3... 130 mm

Partial rotary actuator 0... 120 ℃

High resolution of position sensor system, conductive adhesive, rotation

potentiometer

Operation operation key and plain text display

communication

8635 PA PROFIBUS PA IEC 1158-2 graph B actuators

3rd edition

Type 8635? HART communication (optional)

Operating software

Type 8635 PA • SIMANTIC PDM

The FDT4 interface is being prepared for HART

: electrical connection 2xm20x.5 liner clamping range 6... 12 mm

Screw terminal 0.14... 1.5 square millimeter

粉尘含量5级(粒径≤40微米)
粒子密度5级( ≤ 10毫克/立方米)
压力露点分钟。在工作条件下的10°
油浓度3级( ≤1毫克/立方米)
控制空气温度-25 ... +60 °C 1)
环境温度-25 ... +60 °C 1)
供应压力1.4 ... 6 BAR3 )
空气流容量)55升/分钟, 1.4 BAR3 )
控制阀170升/分钟6 BAR3 )加压和排气
本质耗气量0升/分钟
定位范围
线性执行器3 ... 130毫米
部分回转执行器0 ... 120℃
位置传感器系统的高分辨率,导电胶,旋转
电位器
操作操作键和纯文本显示
沟通
8635 PA型PROFIBUS PA的IEC 1158-2图B执行器
第3版
类型8635 , ? HART通信(可选)
操作软件
8635型PA • SIMANTIC PDM
正在准备• FDT4 )接口用于HART
:电气连接2xM20x1.5的衬套夹紧范围6 ... 12毫米
螺丝端子的0.14 ... 1.5平方毫米

更多宝德产品和选型可以系列销售人员。

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
联系人
在线客服
用心服务 成就你我