宝帝burkert 00132460 宝德6518宝德先导阀（1）电磁阀接线头松动或线头脱落，电磁阀不得电，可紧固线头。 （2）电磁阀线圈烧坏，可拆下电磁阀的接线，用万用表测量，如果开路，则电磁阀线圈烧坏。原因有线圈受潮，引起绝缘不好而漏磁，造成线圈内电流过大而烧毁，因此要防止雨水进入电磁阀。此外，弹簧过硬，反作用力过大，线圈匝数太少，吸力不够也可使得线圈烧毁。
宝帝burkert 00132460 宝德6518
(1) the solenoid valve is loose or the line head is off, the solenoid valve is not electric, and the wire can be fastened.
(2) solenoid valve coil is burnt, and the wiring of the solenoid valve can be removed and measured with a multimeter. If the circuit is opened, the solenoid valve coil is burnt out. The reason is that the coil is damp and the insulation is bad and the leakage of magnetism causes excessive current in the coil to burn, so it is important to prevent rainwater from entering the solenoid valve. In addition, the spring is too hard, the reaction force is too big, the coil turns too few, the suction is insufficient also can make coil burn.
(3) the solenoid valve is stuck. The valve sleeve of solenoid valve has a small clearance between the valve core and the valve core. It is easy to get stuck when the mechanical impurities are brought in or the valve body is rusty. The ultimate solution is to take the solenoid valve apart, remove the valve core and the valve core sleeve, and clean it with CCI4, so that the valve core is flexible in the valve sleeve. The assembly sequence of each part and the external wiring position should be paid attention to in order to reassemble and connect correctly.
宝帝burkert 00132460 宝德6518
| 品牌： | BURKERT |
|---|---|
| 型号： | 6518/6519 |
| 材质： | 黄铜 |
| 类型(通道位置)： | 二通式 |
| 连接形式： | 螺纹 |
| 适用介质： | 空气 |
| 流动方向： | 换向 |
| 用途： | 排空 |
| 公称通径： | 8.0-9.0（mm） |
| 工作温度： | 常温（℃） |
| 位置数： | 两位或三位 |
| 使用压力： | 0.8（mpa） |
| 有效截面积： | 0（mm2） |
| 动作方式： | 电磁 |
| zui高动作频率： | * |
| 形态： | 柱塞式 |
| 标准： | 德标 |
| 压力环境： | 常压 |
更多宝德产品和选型可以销售人员。
