burkert 156309 宝德2822直动电磁阀一级代理，公司专业供应销售代理burkert系列产品，直动式比例阀 2822 可被作为调节元件应用于过程调节，适合技术真空状态。通过专门的设计将摩擦和粘滑效应Z小化，进而获得一个理想的测量间隔、可再现性以及反应灵敏度。阀门受直流电或高频 PWM 信号的控制。输入信号为零时，阀门会在弹性阀座密封件的作用下密
burkert 156309 宝德2822Burkert2822 baode model 2822 burkert2822 direct-acting electromagnetic valve level agents, the company specialized sales agent burkert series products, direct acting proportional valve 2822 can be as a regulating element applied to the process adjustment, is suitable for vacuum technology. The friction and slimy effect are minimized by special design, and an ideal measurement interval, reproducibility and response sensitivity are obtained. Valves are controlled by direct current or high-frequency PWM signals. When the input signal is zero, the valve will seal off under the action of the resilient seat seal. The valve has little noise and is therefore especially suitable for medical use.burkert2822直动电磁阀一级代理，公司专业供应销售代理burkert系列产品，直动式比例阀 2822 可被作为调节元件应用于过程调节，适合技术真空状态。通过专门的设计将摩擦和粘滑效应zui小化，进而获得一个理想的测量间隔、可再现性以及反应灵敏度。阀门受直流电或高频 PWM 信号的控制。输入信号为零时，阀门会在弹性阀座密封件的作用下密封关闭。该种阀门几乎没有运行噪音，因此特别适合医疗用途。
burkert 156309 宝德2822
burkert2822直动电磁阀警告！
在危险中：
--确保所提供的密封恰当地使用。
→将密封件插入阀。
注意：
--比例阀不能去除和*调节螺钉一定不能调整。
旋入管道注意：
--使用合适的工具（开口扳手），不要使用线圈作为杠杆臂。
→使用开口扳手握住比例阀的流体室。
→拧管道。
→检查安装是否有泄漏。
burkert2822 宝德型号2822
burkert2822直动电磁阀注意事项：
设备的高压处有被伤害的风险
--在线路松动或阀门，关闭压力和发泄线。
安装位置：任意位置，用执行器的上方。
→清洗管道和法兰连接。
→在阀前部安装污垢过滤器中流动的方向
（目尺寸0.02 - 0.4毫米;根据孔口）
Burkert2822 baode model 2822
Burkert2822 direct electromagnetic valve warning!
In danger:
- ensure that the provided seal is properly used.
Insert the seal into the valve.
Note:
- proportional valves cannot be removed and central adjustment screws must not be adjusted.
Incoming pipeline note:
Use the right tools (open wrenches) and do not use coils as lever arms.
To use the open wrench to hold the fluid chamber of the proportional valve.
Twist the pipe.
Check for leaks.
Burkert2822 baode model 2822
The attention of burkert2822 direct electromagnetic valve:
The high pressure of the device has the risk of being hurt
- close pressure and outlet lines on line loose or valve.
Installation position: anywhere, preferably above the actuator.
Wash pipe and flange connection.
The direction of flow in fouling filter in front of the valve
(dimensions 0.02-0.4mm; According to the orifice
