宝德burkert6012 D 1.2 24V DV本公司经销批发的通用电磁阀、过程控制阀、液体分析阀、传感器、变送器、控制器、电动气动调节阀、电磁阀消费者市场，在消费者当中享有较高的地位，公司与多家零售商和代理商建立了*稳定的合作关系。
宝德burkert6012 D 1.2 24V DVTechnical parameters of size: 1.2 1.6 mm connectors: G1/8 - G1/4, Flange valve body material: brass or stainless steel sealing material: FPM applicable medium: suitable for water, air and other general neutral medium medium temperature: - 10 to + 100 ℃ pressure range: 0 to 10 bar power: / DC 24 v, 24 v/AC, 110 v/AC, 230 v/AC 50 hz protection: with IP cable socket 65
技术参数通径： 1.2-1.6mm连接口：G1/8—G1/4，Flange阀体材质：黄铜或不锈钢密封材质：FPM适用介质：适用于水，空气等一般中性介质介质温度：-10to +100℃压力范围：0-10bar电源：24V/DC,24V/AC,110V/AC,230V/AC,50HZ防护: 带电缆插座IP 65
宝德burkert6012 D 1.2 24V DV
According to the fluid parameters select the solenoid valve: material, temperature group
1. Corrosive fluid: suitable for anti-corrosion solenoid valve and all-stainless steel; Edible ultra-clean fluid: choose food grade stainless steel valve.
2. High temperature fluid: choose the solenoid valve manufactured by high temperature resistant electrical material and sealed material, and choose piston type structure type.
3. Fluid status: large to gas, liquid or mixed state, especially if the aperture is larger than DN25.
4. Fluid viscosity: it is usually optional below 50cSt, and high viscosity solenoid valve is preferred if it exceeds this value. 5
据流体参数选择电磁阀的：材质、温度组
1、腐蚀性流体：宜选用耐腐蚀电磁阀和全不锈钢；食用超净流体：宜选用食品级不锈钢材质电磁阀。
2、高温流体：要选择采用耐高温的电工材料和密封材料制造的电磁阀，而且要选择活塞式结构类型的。
3、流体状态：大至有气态，液态或混合状态，特别是口径大于DN25订货时一定要区分开来。
4、流体粘度：通常在50cSt以下可任意选择，若超过此值，则要选用高粘度电磁阀。
更多宝德产品和选型可以咨询销售人员。
